Gravimeter Precision: 0,2·10-6m/s2
Resolution: 700 m
Distance Laser Precision: 0.1mm
  • Main Frequency: 1413 MHz
  • Bandwidth (3dB): 20 MHz
L-band is used to compensate for the shallow layers of the soil (0 to 40cm). These layers are mainly affected by ground moisture changes.
Interference mitigation system The interference mitigation system allows the elimination of digital interferences cast by other electronic devices.
Thermal multispectral camera Thermal camera is used to compensate energy received due to temperature changes on soil surface. Soil deeper layers are considered thermally stable for the purposes of the survey.
Resolution 1024x768 px
Precision 0.2 K
  • GPS, Glonass and Beidou integrated receiver
  • CEP position accuracy: 2.5 m
  • WGS82 EPSG:4326 format
Gathered data files are stored georeferenced (latitude longitude and time).
Inertial Measurement Unit (IMU) A precision IMU is required for the projection of the antenna’s beam and compensate for the inclination of the aircraft.
Power Supply
  • Voltage: 24 V
  • Consumption:
    ‑ Electronics: 1 A
    ‑ Temperature stabilization system: 12 A
RADAR M2TM hardware is thermally stable to decrease the effect of internal temperature change when measuring.
  • Size: 700 mm x 900 mm
  • Weight: 50 kg

Metal detection
Three different qualitative measurements (HIGH, MID, LOW).
 ‑ Au, from 0.1-0.5 g/Tn
 ‑ Cu, from 0.1-0.5 %
 ‑ Zn, from 0.5 %
Pixel size  ‑ 70 m natural pixel size.
 ‑ 5 m pixel overlapping flight path with post processed.
Area covered 100 to 2000 ha per 10 to 20 days of prospecting projected.